| 2024-04 |
Experimental investigation on heat transfer of an impinging jet of supercritical CO2 and comparison with liquid and gaseous CO2 |
International Communications in Heat and Mass Transfer
|
| 2024-04 |
Surface roughening and hemi-wicking: Synergistic impact on flow boiling |
International Journal of Mechanical Sciences
|
| 2024-02 |
Effect of nanobubbles on powder morphology in the spray drying process |
Journal of Dairy Science
|
| 2024-01 |
핵융합로 증식 블랑켓 냉각 충돌제트의 유동 및 열전달 특성 연구 |
대한기계학회논문집 B
|
| 2024-01 |
Design and fabrication of heat pipes using additive manufacturing for thermal management |
Applied Thermal Engineering
|
| 2023-12 |
Minimization of Aircraft Infrared Susceptibility in Three-Dimensional Space Through Signature Synchronization |
IEEE TRANSACTIONS ON AEROSPACE AND ELECTRONIC SYSTEMS
|
| 2023-11 |
Flexible Metasurface for Microwave-Infrared Compatible Camouflage via Particle Swarm Optimization Algorithm |
Small
|
| 2023-09 |
Free-standing nanowire printed surfaces with high variability in substrate selection for boiling heat transfer enhancement |
International Journal of Heat and Mass Transfer
|
| 2023-07 |
Temperature-dependent wicking dynamics and its effects on critical heat flux on micropillar structures in pool boiling heat transfer |
International Communications in Heat and Mass Transfer
|
| 2023-07 |
Effects of staggered dimple array under different flow conditions for enhancing cooling performance of solar systems |
Applied Energy
|
| 2023-07 |
Superbiphilic patterned nanowires with wicking for enhanced pool boiling heat transfer |
International Journal of Mechanical Sciences
|
| 2023-06 |
박스형 미익의 수평 위치와 너비에 따른 BWB 비행체의 공력 및 세로 정안정성 분석 |
Journal of The Korean Society Aeronautical and Space Sciences
|
| 2023-06 |
Investigation on microstructure evolution of iron-based alloy via synchronous powder-feeding underwater laser additive |
Materials & Design
|
| 2023-05 |
차단구조가 적용된 파형 배열충돌제트의 유동 및 열전달 특성 |
Transactions of the KSME, B
|
| 2023-05 |
Local heat and mass transfer in a rotor-stator system with hub inflow: Thermal boundary layer and superposition effect |
International Communications in Heat and Mass Transfer
|
| 2023-05 |
Heat/mass transfer augmentation in a leading-edge channel with extended ribs |
International Communications in Heat and Mass Transfer
|
| 2023-04 |
Effect of Componential Camouflage on Aircraft's IR Multiband Susceptibility |
IEEE Transactions on Aerospace and Electronic Systems
|
| 2023-04 |
열회로망을 이용한 판형 히트 파이프 열전달 성능 예측 |
Transactions of the KSME, B
|
| 2023-02 |
Numerical evaluation of a new impingement cooling scheme with a separate return-channel applied to turbine blade leading edge |
Applied Thermal Engineering
|
| 2023-02 |
Augmented cooling performance in gas turbine blade tip with slot cooling |
International Journal of Heat and Mass Transfer
|
| 2023-02 |
Uniform impingement heat transfer distribution in corrugated channel with an anti-crossflow-wing |
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
|
| 2023-01 |
Durable camouflage materials by polyimide nanofilm with thermal management |
Applied Surface Science
|
| 2023-01 |
Enhancement of blade tip cooling with different position on tip cooling slot |
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
|
| 2022-11 |
Enhanced boiling heat transfer by nucleation patterning with self-assembly of re duce d graphene oxide coating |
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
|
| 2022-06 |
Multispectral Optical Confusion System: Visible to Infrared Coloration with Fractal Nanostructures |
ACS Applied Materials and Interfaces
|
| 2022-06 |
레이돔 표면에 금속 나노코팅을 적용한 적외선 저피탐 성능특성 연구
|
한국군사과학기술학회지
|
| 2022-06 |
Unidirectional wicking-driven flow boiling on tilted pillar structures for high-power applications |
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
|
| 2022-04 |
Effect of profiled endwall on heat transfer under different turbulence intensitie |
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
|
| 2022-04 |
Energy-efficient design of dual circulating fluidized bed system for CCUS by multi-tube configuration with junctions |
ENERGY
|
| 2022-03 |
Active cooling of photovoltaic (PV) cell by acoustic excitation in single-dimpled internal channel |
APPLIED ENERGY
|
| 2022-03 |
Heat Transfer Measurements for Array Jet Impingement With Castellated Wall |
JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME
|
| 2022-02 |
가스터빈 회전부 림 씰 두께 증가에 따른 씰링 효율 변화에 대한 수치해석 연구 |
한국추진공학회지
|
| 2022-01 |
Surfaces with bent micro-polymerized pillars exhibit enhanced heat transfer during subcooled flow boiling |
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
|
| 2021-12 |
초음속 항공기 전방위 탐지각도에 따른 적외선 피격성 분석 |
한국군사과학기술학회지
|
| 2021-12 |
Measurement of surface heat transfer caused by interaction of sonic jet and supersonic crossflow near injection hole |
AEROSPACE SCIENCE AND TECHNOLOGY
|
| 2021-12 |
Effects of tip-bleed holes on two-pass channel on heat transfer with various aspect ratios |
Case Studies in Thermal Engineering
|
| 2021-11 |
Thermoelectric behaviors of ZnO mesoporous thin films affected by strain induced from the different dopants radii (Al, Ga, and In) |
APPLIED PHYSICS LETTERS
|
| 2021-11 |
Local heat/mass transfer of array jet impingement cooling with pin-fin heat sinks |
IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY
|
| 2021-10 |
Measurement of heat/mass transfer at second stage vane endwall according to step heights |
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY
|
| 2021-10 |
Unsteady hot gas ingestion through the double rim-seals of an axial gas turbine |
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
|
| 2021-10 |
Delta-Winglet-Pair for Enhancing Cooling Performance of a Single Dimple Imprinted Internal Channel |
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
|
| 2021-10 |
Effect of shelf squealer tip configuration on aerothermal performance of gas turbine blade |
INTERNATIONAL JOURNAL OF THERMAL SCIENCES
|
| 2021-09 |
Flexible Thermocamouflage Materials in Supersonic Flowfields with Selective Energy Dissipation |
ACS APPLIED MATERIALS & INTERFACES
|
| 2021-08 |
가스터빈 블레이드의 얇은 벽에서의 팬 형상 홀 최적화 |
한국추진공학회지
|
| 2021-08 |
Impingement/effusion cooling with a hollow cylinder structure for additive manufacturing: Effect of channel gap height |
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
|
| 2021-07 |
Wake effects on heat transfer from a turbine blade tip with different configurations and its corresponding shroud |
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
|
| 2021-07 |
Transparent Metamaterials for Multispectral Camouflage with Thermal Management |
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
|
| 2021-07 |
Heat transfer from a dimple-imprint downstream of boundary-layer trip-wire |
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
|
| 2021-05 |
Efficient design of heat exchange for CFB reactors in CO2 capture system regarding geometry-induced secondary flow |
ENERGY CONVERSION AND MANAGEMENT
|
| 2021-05 |
Effects of seal installation in the mid-passage gap between turbine blade platforms on film cooling |
APPLIED THERMAL ENGINEERING
|
| 2021-05 |
Effect of misalignment at 2nd vane endwall on heat transfer with purge flow |
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
|
| 2021-04 |
가스터빈 베인 후류에 의한 슈라우드면 열전달 특성 |
Transactions of the Korean Society of Mechanical Engineers, B
|
| 2021-03 |
가스터빈 블레이드 삼각 내부 냉각 유로 종횡비에 따른 열전달 특성 |
Transactions of the Korean Society of Mechanical Engineers, B
|
| 2021-03 |
Film cooling characteristics on blade platform with a leakage flow through mid-passage gap |
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
|
| 2021-01 |
가스터빈 블레이드 내부 배열별 핀-휜 지름 변경에 따른 냉각 성능 특성 변화 |
Transactions of the Korean Society of Mechanical Engineers, B
|
| 2021-01 |
가스터빈 블레이드 전연부 필렛 적용에 따른 유동 및 열전달 특성 분석 |
Transactions of the Korean Society of Mechanical Engineers, B
|
| 2021-01 |
Enhancement of flow boiling heat transfer using heterogeneous wettability patterned surfaces with varying inter-spacing |
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
|
| 2020-12 |
고도 변화에 따른 전투기 적외선 신호 최소 조건 분석 |
한국전산구조공학회논문집
|
| 2020-11 |
원형 실린더 전단에 분절 핀 설치에 따른 바닥면의 유동 및 열전달 특성 연구 |
Transactions of the Korean Society of Mechanical Engineers, B
|
| 2020-10 |
가스터빈 2단 베인 슈라우드면 필렛 크기 변화에 따른 효과 분석 |
한국유체기계학회 논문집
|
| 2020-08 |
Effect of Various Coolant Mass Flow Rates on Sealing Effectiveness of Turbine Blade Rim Seal at First Stage Gas Turbine Experimental Facility |
ENERGIES
|
| 2020-07 |
Impingement/effusion cooling with a hollow cylinder structure for additive manufacturing |
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
|
| 2020-05 |
4차 산업혁명 시대 기계공학 분야 엔지니어에게 필요한 역량과교육에 관한 델파이 연구 |
공학교육연구
|
| 2020-05 |
가스터빈 블레이드 전연면 내부 유로 요철 형상에 따른 열전달 특성 연구 |
Transactions of the Korean Society of Mechanical Engineers, B
|
| 2020-05 |
Thermal design of dual circulating fluidized bed reactors for a large-scale CO2 capture system |
APPLIED THERMAL ENGINEERING
|
| 2020-04 |
Enhanced boiling heat transfer on micro-structured surfaces via ultrasonic actuation |
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
|
| 2020-02 |
Effects of Wakes on Blade Endwall Heat Transfer in High Turbulence Intensity |
JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME
|
| 2020-02 |
터빈 1단 베인 엔드월에서 막냉각 홀 배열에 따른 막냉각 특성 변화 |
한국추진공학회지
|
| 2020-02 |
Multiple Resonance Metamaterial Emitter for Deception of Infrared Emission with Enhanced Energy Dissipation |
ACS APPLIED MATERIALS & INTERFACES
|
| 2019-12 |
Enhanced nucleate boiling using a reduced graphene oxide-coated micropillar |
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
|
| 2019-12 |
Effects of radiative local heating on metal solidification during selective laser melting for additive manufacturing |
APPLIED SURFACE SCIENCE
|
| 2019-09 |
Ti doping effects on the Seebeck coefficient and electrical conductivity of mesoporous ZnO thin film |
MATERIALS CHEMISTRY AND PHYSICS
|
| 2019-08 |
Effect of temperature dependent material properties on thermoelastic damping in thin beams |
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
|
| 2019-08 |
Enhanced thermal uniformity and stability in pool boiling heat transfer using ultrasonic actuation |
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
|
| 2019-06 |
Temperature Effects on Electromechanical Response of Deposited Piezoelectric Sensors Used in Structural Health Monitoring of Aerospace Structures |
SENSORS
|
| 2019-06 |
Metamaterial-Selective Emitter for Maximizing Infrared Camouflage Performance with Energy Dissipation |
ACS APPLIED MATERIALS & INTERFACES
|
| 2019-03 |
Heat Transfer and Its Innovative Applications |
Inventions
|
| 2019-03 |
Hierarchical Metamaterials for Multispectral Camouflage of Infrared and Microwaves |
ADVANCED FUNCTIONAL MATERIALS
|
| 2018-11 |
Enhancement of cooling performance of a helium-cooled divertor through the addition of rib structures on the jet-impingement area |
FUSION ENGINEERING AND DESIGN
|
| 2018-11 |
Nozzle-to-target distance effect on the cooling performances of a jet-impingement helium-cooled divertor |
FUSION ENGINEERING AND DESIGN
|
| 2018-10 |
Effects of unsteady wakes on heat transfer of blade tip and shroud |
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
|
| 2018-10 |
Enhanced Boiling Heat Transfer using Self-Actuated Nanobimorphs |
NANO LETTERS
|
| 2018-09 |
Design of multilayer ring emitter based on metamaterial for thermophotovoltaic applications |
ENERGIES
|
| 2018-08 |
Characterization of mesoporous silica thin films for application to thermal isolation layer |
THIN SOLID FILMS
|
| 2018-08 |
Study of the effect of stress/strain of mesoporous Al-doped ZnO thin films on thermoelectric properties |
SOLID STATE SCIENCES
|
| 2018-08 |
Pt-decorated SnO2 nanotubes prepared directly on a conducting substrate and their application in solar energy conversion using a solid polymer electrolyte |
APPLIED SURFACE SCIENCE
|
| 2018-07 |
Effect of mesopore-induced strain/stress on the thermoelectric properties of mesoporous ZnO thin films |
APPLIED SURFACE SCIENCE
|
| 2018-06 |
Heat Transfer Characteristics of a Focused Surface Acoustic Wave (F-SAW) Device for Interfacial Droplet Jetting |
Inventions
|
| 2018-06 |
Zirconia-based alumina compound aerogels with enhanced mesopore structure |
CERAMICS INTERNATIONAL
|
| 2018-05 |
Effect of the wake on the heat transfer of a turbine blade endwall according to relative position of the cylindrical rod |
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
|
| 2018-05 |
Enhanced boiling heat transfer on nanowire-forested surfaces under subcooling conditions |
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
|
| 2018-02 |
Effect of the injection angle on local heat transfer in a showerhead cooling with array impingement jets |
INTERNATIONAL JOURNAL OF THERMAL SCIENCES
|
| 2018-02 |
Enhancing thermal stability and uniformity in boiling heat transfer using micro-nano hybrid surfaces (MNHS) |
APPLIED THERMAL ENGINEERING
|